Facile synthesis of black phosphorus directly grown on carbon paper as an efficient OER Electrocatalyst: Role of Interfacial charge transfer and induced local charge distribution

Black phosphorus (BP), as a new 2D material, is normally synthesized by a high-pressure and high-temperature (HPHT) method from white and red phosphorus, which severely hinders the further development of BP for any potential applications and leads to search for other potential applications of BP with big challenge. Herein, we develop a facile and efficient Thermal-Vaporization-Transformation (TVT) approach to prepare a highly active BP directly grown on carbon paper as the electrode for Oxygen evolution reaction (OER), showing a low onset potential of 1.45 V versus RHE. Simultaneously, the current density of BP-CP illustrates the excellent electro-catalysis stability only decreases by 3.4% after continuous operation for 10000 s. Meanwhile, the density functional theory (DFT) calculations further illustrates the P-doped carbon layer in the upper side of BP layer is actually responsible for its enhanced OER property, and the adjacent carbon atoms of the embedded P atoms are actually the active sites due to the induced local change distribution by intramolecular change transfer. Considering the facile, but efficient and scalable, TVT approach can directly synthesize BP-CP with excellent OER performance, which is promising for BP electrocatalysts used for OER in metal-air batteries, fuel cells, water-splitting devices, even other key renewable energy.     

Application of artificial neural network method to predict the breakage properties of PGE bearing chromite ore

In the present investigation, systematic grinding experiments were conducted in a laboratory ball mill to determine the breakage properties of low-grade PGE bearing chromite ore. The population balance modeling technique was used to study the breakage parameters such as primary breakage distribution (B_{i, j}) and the specific rates of breakage (S_i). The breakage and selection function values were determined for six feed sizes. The results stated that the breakage follows the first-order grinding kinetics for all the feed sizes. It was observed that the coarser feed sizes exhibit higher selection function values than the finer feed size. Further, an artificial neural network was used to predict breakage characteristics of low-grade PGE bearing chromite ore. The predicted results obtained from the neural network modeling were close to the experimental results with a correlation of determination R² = 0.99 for both product size and selection function.     

Validation of qPCR method for enterococci quantification at Toronto beaches: Application for rapid recreational water monitoring

Rapid quantitative PCR-based methods for enterococci monitoring can allow public health authorities to make more timely beach posting decisions. However, qPCR methods must be assessed for proposed sites as locale-specific factors may affect DNA recovery or qPCR inhibition. We assessed the feasibility of the USEPA 1609.1 qPCR-based (Enterococcus) method at two urban Toronto beaches and three recreational areas at nearby river mouths in parallel with culture-based methods on the same water samples. A strong positive correlation was observed between the Enterococcus qPCR method and culturing-based quantification methods for E. coli and enterococci at both beaches and two river mouth areas. One river, known to be highly sewage-impacted, did not yield DNA suitable for qPCR analyses. qPCR results from biological replicates were strongly correlated and showed coefficients of variation as low as or lower than culture-based methods. With respect to Beach Action Value exceedances, the USEPA 1609.1 qPCR method provided an 80–90% level of agreement with E. coli enumeration results and >90% with enterococci enumeration. Results indicated that if recreational water locations and sampling conditions met the requirements of the USEPA 1609.1 qPCR method, the method can meet or exceed all quality control requirements and provide water quality results within 3.5 h for diverse recreational water settings around the City of Toronto.     

Realizing fragment spawning and fragment growth in the parallelized Discrete Element Method (DEM) during modelling of comminution

The particle based Discrete Element Method (DEM) can be applied to examine comminution processes. In this study, a DEM framework has been extended to model particle breakage without mass loss. After a breakage event occurs, spherical particles, as often considered in the DEM, are replaced by size reduced spherical fragments. During the following time steps, the fragments grow to their desired sizes, so that the mass loss can be counterbalanced. Previously defined overlaps with adjacent unbroken and broken particles (fragments) as well as walls are allowed. The breakage model has been realized in a parallelized DEM framework because comminution processes are often attributed to large numbers of particles and by parallelization the computational time can be reduced efficiently. An oedometer (one-dimensional compression in axial direction of a confined particle bed) has been modelled to investigate the parallelization efficiency and the influence of the permitted overlaps during the growth process on the growth duration. A simplified roller mill has been considered to examine the applicability of the breakage procedure considering parallelization. The results show that parallelization reduces computational time considerably. The breakage procedure is suitable to model comminution processes involving even densely packed particle systems and is superior to existing approaches.     

基于多尺度高斯核的分布式正则化回归学习算法

针对工业、信息等领域出现的基于较大规模、非平稳变化复杂数据的回归问题,已有算法在计算成本及拟合效果方面无法同时满足要求.因此,文中提出基于多尺度高斯核的分布式正则化回归学习算法.算法中的假设空间为多个具有不同尺度的高斯核生成的再生核Hilbert空间的和空间.考虑到整个数据集划分的不同互斥子集波动程度不同,建立不同组合系数核函数逼近模型.利用最小二乘正则化方法同时独立求解各逼近模型.最后,通过对所得的各个局部估计子加权合成得到整体逼近模型.在2个模拟数据集和4个真实数据集上的实验表明,文中算法既能保证较优的拟合性能,又能降低运行时间.     

基于法律政策和检测性质的市县级食药检测机构整合探讨

本研究通过国家认证认可监督管理委员会发布的《2016年度检验检测服务业统计报告》相关数据,基于食品药品法律政策、检测性质、规模效应、检测能力建设等方面,对基层食品药品类检验检测资源整合路径进行论证分析。面对当前事业单位机构改革,本研究提出市县级食品药品类检验检测机构应进行跨行业、跨部门、跨层级优化整合的建议,建立以政府实验室为基础、市场检测为补充的食品药品安全检验检测资源配置模式,为实现基层食品药品安全监管现代化治理提供良好的检验检测技术服务支撑能力。     

A system for time-fluctuating flow rate measurements in a single-blade pump circuit

Commonly used flow rate measurement systems provide an accurate and stable output value of the quasi-stationary flow rate. In some pump types as e.g. single-blade pumps significant flow rate fluctuations may occur even in steady operation points due to rotor-stator interaction. For the analysis of the time-resolved flow rate a new measurement and evaluation method is presented based on an electromagnetic flow meter. Internal averaging of the flow meter is deactivated and the raw signal is evaluated directly with a sampling rate of 3 kHz. With ensemble-averaging in combination with an impeller position detection, interfering signals acting on the time-resolved measurement signal are filtered out. Accompanying numerical simulations of the pump flow circuit are carried out with a 1D method of characteristics and validated against well-established time-resolved pressure measurements of the pump flow. Experiment and simulation show a resembling trend of pressure as well as flow rate fluctuations over the entire operation range of the pump. Thus, by the combined utilisation of measurement and simulation technique, we assure the validity of the ensemble-averaged flow rate fluctuation results. We find that the flow rate fluctuations show a consistent phase shift to the pressure fluctuations that increases towards overload. The flow rate amplitude is an order of magnitude smaller than the amplitude of the pressure fluctuations.     

An effective method of bulk materials moisture measurement using capacitive sensors

When we speak about capacitance moisture meters for bulk materials we have to face with different values of dielectric permittivity for different bulk materials in dehydrated state, what causes a method error that can be named ‘type uncertainty’. Besides, different varieties of the same material have different values of dielectric permittivity, which depend from geographical origin, processing conditions etc. It can be hardly predicted automatically and type uncertainty can be compensated only in separate situations with the help of preliminary calibration. Main tasks of the research are to develop new comparison principle of moisture measurement with better accuracy due to effective compensation of physical, chemical and granulometric composition influence on the result of moisture measurement, develop new primary and secondary instrument transducers. Moisture sensor consists of four measuring capacitors. Two of them should be filled with a sample, which moisture content should be determined, and other pair of measuring capacitors should be filled with a same substance, but previously dehydrated. Mathematical models, developed to take into account granulometric composition of a bulk material were used to carry out a comparison analysis for three types of instrument measuring transducers. Obtained results proved that suggested principle of moisture measurement provides effective compensation of granulometric composition influence. Developed measuring principle had been experimentally tested what helped to confirm that it provides two times better compensation of different physical and chemical composition for different materials in comparison with the direct comparison method.